Content for comparison

PA4.6 - polyamide 4.6

Other material names PA4.6: Polyamide 46, 4/6, 4.6

Material group:

Polyamide

Special Polyamide 4.6 offers higher rigidity and creep resistance over the entire temperature range compared to conventional polyamides. This makes it especially suitable for applications ranging from 80 to 150 degrees Celsius where it provides us with significantly higher stiffness, wear and creep resistance such as PA6G, POM-C or PET material.

Color of material:

Brown

Typical applications:

machine parts with increased heat resistance
gears
pulleys
cases

Show more our products

The material is used in:

Electrotechnical industry

Packaging industry

Engineering industry

Steel industry

Production of single-purpose machines

Features:

Broadest size range availability
Good mechanical and electrical properties
Ideal balance of strength and toughness
Cast as finished parts and near net shapes

Material availability:

Production only on request

Group of materials Polyamide:

Comparison of material properties

Comparison of material properties from the group Polyamide

	PA6G+oil	PA6G+MoS2	PA6G	PA66+GF30	PA66	PA6	PA4.6	PA12G
Specific weight	1.14 g/cm³	1.16 g/cm³	1.15 g/cm³	1.29 g/cm³	1.14 g/cm³	1.14 g/cm³	1.18 g/cm³	1.03 g/cm³
Yield strength	80 N/mm²	78 N/mm²	85 N/mm²	160 N/mm²	85 N/mm²	76 N/mm²	100 N/mm²	60 N/mm²
Tensile strength
Allowable mean pressure deformation 1%	22.00 N/mm²	25.00 N/mm²	26.00 N/mm²	28.00 N/mm²	25.00 N/mm²	24.00 N/mm²	23.00 N/mm²
Allowable mean pressure deformation 2%	43.00 N/mm²	49.00 N/mm²	51.00 N/mm²	55.00 N/mm²	49.00 N/mm²	46.00 N/mm²	45.00 N/mm²
Allowable mean pressure deformation 5%	79.00 N/mm²	88.00 N/mm²	92.00 N/mm²	90.00 N/mm²	90.00 N/mm²	80.00 N/mm²	94.00 N/mm²
p.v dry limit	0.23 MPa.m/s		0.13 MPa.m/s		0.13 MPa.m/s	0.11 MPa.m/s		0.10 MPa.m/s
Flexural strength	140 N/mm²		140 N/mm²	250 N/mm²	135 N/mm²	130 N/mm²	150 N/mm²	90 N/mm²
Tensibility	50 %	25 %	40 %	5 %	50 %	50 %	25 %	55 %
Flexural modulus	2 800 N/mm²		3 200 N/mm²		2 900 N/mm²	2 500 N/mm²	3 200 N/mm²	1 500 N/mm²
Tensile modulus	2 600 N/mm²	3 300 N/mm²	3 500 N/mm²	11 000 N/mm²	3 000 N/mm²	3 200 N/mm²	3 300 N/mm²	2 000 N/mm²
Impact toughness	bez zlomu	bez zlomu	bez zlomu	50	bez zlomu	bez zlomu	bez zlomu	bez zlomu
Notched toughness	>5 kJ/m²	>3 kJ/m²	>4 kJ/m²	>6 kJ/m²	>4 kJ/m²	>5 kJ/m²	>8 kJ/m²	>15 kJ/m²
Ball hardness	140 N/mm²	160 N/mm²	165 N/mm²	240 N/mm²	170 N/mm²	150 N/mm²	165 N/mm²	100 N/mm²
Friction coefficient	0.18	0.32	0.35	0.45	0.35	0.38	0.35	0.32
Sliding wear	0.05 um/km	0.10 um/km	0.10 um/km		0.10 um/km	0.23 um/km		0.80 um/km
Abrasive wear			150		160			260
Antistatic material	No	No	No	No	No	No	No	No
Permittivity	3.70	3.60	3.60	3.90	3.80	3.90	3.80	3.50
Electrical strength	22 kV/mm	24 kV/mm	25 kV/mm	30 kV/mm	27 kV/mm	25 kV/mm	25 kV/mm	20 kV/mm
Specific internal resistance	10^(14) Ω	10^(13) Ω	10^(13) Ω	10^(14) Ω	10^(12) Ω	10^(12) Ω	10^(14) Ω	10^(14) Ω
Specific surface resistance	10^(13) Ω.cm	10^(12) Ω.cm	10^(12) Ω.cm	10^(13) Ω.cm	10^(12) Ω.cm	10^(12) Ω.cm	10^(13) Ω.cm	10^(13) Ω.cm
Melting point	220 °C	220 °C	220 °C	255 °C	265 °C	220 °C	295 °C	179 °C
Thermal expansion	8 10^(-5)/K	8 10^(-5)/K	8 10^(-5)/K	3 10^(-5)/K	10 10^(-5)/K	10 10^(-5)/K	9 10^(-5)/K	10 10^(-5)/K
Thermal conductivity	0.23 W/(K.m)	0.30 W/(K.m)	0.29 W/(K.m)	0.30 W/(K.m)	0.28 W/(K.m)	0.28 W/(K.m)	0.30 W/(K.m)	0.23 W/(K.m)
Permanent use temperature	-40-105	-30-105	-40-105	-30-120	-30-100	-30-95	-40-155	-60-80
Transient temperature of use	-40-160	-40-170	-40-170	-30-180	-30-150	-40-140	-40-200	-60-140
Friction coefficient	0.18	0.32	0.35	0.45	0.35	0.38	0.35	0.32
Absorbability	1,8 %	2,4 %	2.2 %	1,7 %	2,5 %	2,6 %	2,8 %	0,9 %
Water absorption	5,5 %	6,7 %	6.5 %	5,5 %	9 %	10 %	9,5 %	1,4 %
Resistance - oils	resistant	resistant	resistant	resistant	resistant	resistant	resistant	resistant
Acid resistance	conditionally resistant	conditionally resistant	conditionally resistant	conditionally resistant	conditionally resistant	conditionally resistant	conditionally resistant	conditionally resistant
Durability - alcali	resistant	resistant	resistant	resistant	conditionally resistant	conditionally resistant	conditionally resistant	resistant
Food contact	No	No	No	No	No	No	No	No
Special features	samomazné vlastnosti					PA6 can absorb up to 7% (by weight) water under high humidity or submerged in water. This can result in dimensional changes up to 2% and a corresponding reduction of physical properties. Proper design techniques can frequently compensate for this factor.	Highest heat resistance of PA materials

Material properties table

Specific weight	1.18 g/cm³
Yield strength	100 N/mm²
Allowable mean pressure deformation 1%	23.00 N/mm²
Allowable mean pressure deformation 2%	45.00 N/mm²
Allowable mean pressure deformation 5%	94.00 N/mm²
Flexural strength	150 N/mm²
Tensibility	25 %
Flexural modulus	3 200 N/mm²
Tensile modulus	3 300 N/mm²
Impact toughness	bez zlomu
Notched toughness	>8 kJ/m²
Ball hardness	165 N/mm²
Friction coefficient	0.35
Antistatic material	No
Permittivity	3.80
Electrical strength	25 kV/mm
Specific internal resistance	10^(14) Ω
Specific surface resistance	10^(13) Ω.cm
Melting point	295 °C
Thermal expansion	9 10^(-5)/K
Thermal conductivity	0.30 W/(K.m)
Permanent use temperature	-40 ; 155 °C
Transient temperature of use	-40 ; 200 °C
Absorbability	2,8 %
Water absorption	9,5 %
Resistance - oils	resistant
Acid resistance	conditionally resistant
Durability - alcali	conditionally resistant
Food contact	No
Special features	Highest heat resistance of PA materials

Some trade names of the material

Tecamid® 4.6

Murylon® HT

Ertalon® 4.6

Trade names unprotected reg. mark:

Polyamide 46, 4/6, 4.6

Engineering plastics and their products can be ordered from TechPlasty. Materials in the same group from different manufacturers are not always directly interchangeable because they may not all have the same technical parameters. Our technical consultants, who have many years of experience in the field of engineering plastics, will be pleased to advise you on the differences in the individual materials, especially in the boundary conditions. Detailed technical data of individual manufacturers' materials can be found in their data sheets.

Some materials trade names are protected trademarks.
Tecamid® 4.6 is a registered trademark of Ensinger; Murylon® HT is a registered trademark of Murtfeldt; Ertalon® 4.6 is a registered trademark of Quadrant;

All other trademarks or registered trademarks are the property of their respective owners.

Content for comparison

PA4.6 - polyamide 4.6

Our offer

The most used plastics

TechPlasty

Quick contact

You are here

Content for comparison

PA4.6 - polyamide 4.6

Our offer

The most used plastics

TechPlasty

Quick contact